Skip to content
Engineering confidence since 2016🇪🇬 Egypt 🇸🇦 Saudi Arabia 🇴🇲 Oman
+20 128 118 9412info@isc-eg.com
ISC Group symbolINTERNATIONAL
SPECIALIZED
CONTRACTING
ISC GROUP

Self-Leveling Flooring in Egypt

ISC Group installs self-leveling flooring systems for suitable industrial and commercial interiors in Egypt. Resin finishes are selected according to substrate condition, operating use and the required appearance.

Self-Leveling Flooring in Egypt

Self-leveling resin floor finishes

Preparation includes checking the concrete, addressing defects and coordinating joints and transitions. A self-leveling resin finish is not a substitute for correcting major substrate level differences or designing drainage falls.

Controlling thickness and finish

Before application, we check slab levels, moisture, strength, joints and drainage. The substrate is prepared and primed, then the resin is mixed, distributed and deaerated according to the system instructions. Major level differences and required falls are addressed before the resin finish.

Self-leveling resin floors for commercial and industrial spaces

Self-leveling flooring produces a smooth finish where the substrate and intended use are compatible. A wearing surface and a self-leveling underlayment are different systems. Slab moisture, floor flatness, traffic, hygiene and cleaning conditions should be checked before system selection.

Cost factors for self-leveling epoxy floors

Share floor area, required thickness, repairs, finish, site access and downtime. Compare epoxy floor coating and Ucrete heavy-duty flooring.

Questions about this service

Can a self-leveling finish correct any level difference?

Corrections must stay within the product’s thickness limits. The slab may need a separate levelling or repair layer first.

Is the finished floor always smooth?

Texture is selected for the use, cleaning requirements and slip resistance. Appearance is only one part of the specification.

Discuss your project with our technical team.

Share your project location, drawings, quantities and site photographs so we can review the requirements.